Henan Harvest Machinery & Truck Co., Ltd
Quality Assured Price Affordable
Add to Cart
Sinotruk 10 Wheelers HOWO 10m3 Cement Mixer 6x4 10cbm 371hp Concrete Mixer Truck
Main features of concrete truck mixer
1) Material selection / Material: WISCO Q345 low alloy steel is used to make the mixer tank blades. Shanghai Baosteel B520JJ or QSTE420TM alloy steel can also be selected for customer requirements.
2) Cutting: All the company's sheet cutting, need to be programmed into the C NC plasma flame cutting machine for cutting and cutting. High efficiency and high precision in the blanking process
3) Cylinder production: There are three key process requirements for mixing car body: one is concentricity, the other is strength, the surface and helix angle of the three cylinder blades
1. Concentricity. Our Company's mixing car body adopts the special “mixing car body splicing tooling”, which effectively guarantees the concentricity of the cylinder through the clamping position of the mixing cylinder flange, head, raceway and barrel connection.
2. Strength. The strength of the tank is mainly guaranteed by the welding process. The company uses automatic welding machine to carry out the ring seam of the tank, the welding of the longitudinal seam, and the welding consumables use the welding wire of a well-known brand.
3. The barrel of the cylinder. The barrel blades are the more critical components of the mixer truck. There are two symmetrically distributed logarithmic spirals in the body of the mixing car. The blades are designed in different sections of the cylinder to have different helix angles, pitches, elevations and chamfers, and eliminate the blades and the wall. The dead angle of the joint can realize three-dimensional space agitation; the feeding and discharging speed is fast, the concrete homogeneity is good, the yield rate is high, and no material is accumulated. The three main technical performance indicators of feed rate, discharge speed, concrete homogeneity and yield rate exceeded the national regulations.
Specification
| Concrete mixing capacity | 8cbm | 10cbm | 12cbm | 14cbm | |
| Cabin | HW76, with 1 sleeper & A/C | ||||
| Vehicle Main Dimension (L x W x H) mm | 9400x2500x3920 | 9600x2500x3950 | 9850x2525x3950 | 10500×2496×3980 | |
| Wheel base (mm) | 3625+1350 | 3825+1350 | 4025+1350 | 1800+3200+1350 | |
| Wheel track (front/rear) (mm) | 1500/2725 | 1500/2365 | 1550/2915 | 1500/2380 | |
| Approach / Departure angle(°) | 16/15 | 19/22 | 25/13 | 16/19 | |
| Tare Weight | 13700 | 14500 | 15300 | 16500 | |
| Loading Capacity | 27300 | 26500 | 25700 | 33500 | |
| Front axles | HF9 1x9000 | HF9 2x9000 | |||
| Rear axles | HC16 2x16000 | ||||
| Engine | Brand | WEICHAI | |||
| Model | WD615.47 | ||||
| Type | 4-stroke direct injection , 6-cylinder in-line with water cooling, turbo- charging and inter-cooling | ||||
| Horse Power | 371hp | ||||
| Emission Standard | Euro II | ||||
| Gearbox | HW19710 , 10 forwards & 2 reverse | ||||
| Clutch | Reinforced diaphragm clutch, diameter 430mm | ||||
| Steering Gear | ZF 8118,power steering, hydraulic steering with power assistance | ||||
| Fuel tank (L) | 300 | ||||
| Tire | 12R22.5 tubeless tire , 10 pieces with one spare total 11 pieces. | ||||
| Brakes | Service brake: dual circuit compressed air brakeParking brake :(emergency brake): spring energy, compressed air operating on rear wheels Auxiliary brake: engine exhaust valve brake | ||||
| Mixing tank material | Q345 | ||||
| Thickness for end plate | 8mm | ||||
| Thickness for mixer body | 6mm | ||||
| Feeding Speed (m3) | ≥3 | ||||
| Discharging Speed (≥m3) | ≥2 | ||||
| Leftover Rate | Nearly Zero | ||||
| Max Rotating Speed (r/min) | 14---16 | ||||
| Driving System | Speed Reducer | Italy brand PMP | |||
| Hydraulic Pump | Italy brand PMP | ||||
| Hydraulic Motor | Italy brand PMP | ||||
| Water Tank Capacity (L) | 400 | ||||
HOWO 10cbm Mixer Pictures
